Area 419 ThunderBeast TBAC CB/ULTRA

Generation 2 mount incorporates a blast baffle, as well as being much more compact. This mount gets torqued into suppressor in order to thread directly onto Hellfire Universal Adapter. Hellfire Wrench Included

Suppressor Mounts

– Suppressor mount allows you to use your compatible suppressors with the Hellfire Self Timing Brake system by simply removing your Hellfire Brake and installing one of these mounts

– Made from aerospace grade 17-4PH Stainless Steel, Titanium mounts are made from US made 6AL4V

– Mounts are Black Nitrided to prevent galling. Titanium mounts are DLC coated.

– Made to meet manufacturers specifications, but these adapters are not associated with their respective manufacturers in any way.

– Generation 2 mounts no longer use a collar like the muzzle brake. These mounts get torqued into your suppressor and therefore allow your suppressor to become a direct thread onto the Hellfire Universal Adapter (left hand). (SiCo Omega, Saker, and Harvester started with the Gen 2 design)

• Allows the mount to be much more compact, and adds very little to the overall length of the system
• We recommend blue Loc-tite on the external threads of the mount to hold it semi-permanently in the suppressor. Since you will be threading the can on in a left hand direction now, if it is not torqued properly into the suppressor, you may unscrew it when attaching to the barrel. No fear though, its impossible to get the two stuck together in this situation due to the opposing thread directions, simply turn it the other way and they will separate, then start over.
• Gen 2 Mounts come with a HELLFIRE Wrench

NOTE: The use of Lemishine (or any citric-acid cleaner) or CLR to clean your brake will likely discolor the black nitride, and will void the lifetime warranty of your product. Don’t do this. Seriously. It’ll turn pink and you’ll feel like an idiot.

Universal Adapter

– Universal adapter system allows TOOL FREE use of multiple muzzle attachments

– Universal adapter is made in one operation on a state of the art CNC lathe, threads are 100% concentric to taper surface

– All Universal Adapters will come Black Nitrided to prevent galling.

– Available in 5/8-24 and 1/2-28. Both are class 3 fit.

This Video quickly shows how the Gen 2 suppressor mounts operate and how to install: